JUMBO STEEL JS-237AP / JS-2310 AP2
PET. HEAVY DUTY STRAPPING BAND MAKING MACHINE
Get the maximum production from JUMBO STEEL PET Band making Machine. This machine produces band widths of 9.5-19MM. Production speed of up to 120 meters per minute for each line. The JS-237AP is simple to run and requires minimal training. If increasing your PET band production is your goal, come to JUMBO STEEL .
JUMBO STEEL's JS-237AP ,JS-2310AP2 has all the very latest technology for increased productivity in PET strapping band production. This newly designed machine provides faster production and superior product.
Quality features give great strapping band production value.
  • Extruding output range: 40 - 100 kgs/hr or 80 - 220 kgs/hr.
  • Band width: 9.5 -19mm.
  • High precision band width ± 0.5mm.
  • Entire machine employs direct drive for low noise running.
  • Gears are hardened and precision ground for quiet running performance.
  • SACMI screw is nitrogen treated, precision ground, and stress relieved.
  • SACMI barrel is nitrogen treated, precision ground, and stress relieved.
  • #304 stainless steel cooling water tank.
  • Separate adjustment for winding torque and running speed ensures uniformity of band.
  • Stretching unit is all-gear driven with oil bath lubrication for stability, quiet running and long service life.
WINDING UNIT
  • The winding unit is driven by a DC torque motor, featuring torque adjustment.
  • The buzzer sounds when the preset length of band is reached.
  • Changing the gears conveniently changes the winding width.
  • Aluminum winding rollers.
  • Choice of 200 or 400mm core bobbin.

PRE-HEAT STRETCHING UNIT
  • The machine uses electric heating to quickly achieve high temperature.
  • The four stretching rollers are individually driven, and heated for efficient stretching.
  • Stretching speed is controlled by a frequency inverter for maximum stability.
EMBOSSING ROLLER
  • The embossing rollers are manufactured from SKD11 material, vacuum heat treated for superior hardness and maximum wear resistance.
  • Embossing depth is pneumatically adjusted with indication reader for accurate reading.
  • Separate motor drive.
MAIN CONTROL PANEL

The temperature for the barrel, screw, and die are separately displayed on the main control panel. Temperature can be preset.

JS-2310AP2
Hydraulic screen change.
JS-2310AP2
  • 2 layer straightening operation extends heating time, ensuring the stability of bands and superior tensile strength.
  • Hot air circulation provides for a more efficient heating solution.
  • Equipped with a water cooling tank for upgrading cooling and stiffening performance.

Outstanding dehumidifying performance ensures constant band quality.

DEHUMIDIFYING DRYER
  • The dehumidifying dryer lowers the moisture content below 0.2% to achieve the utmost performance from production materials.
  • The dryer prevents such problems as cracking, streaking, bubbles, flow marks, poor transparency, etc., which are all caused by incompletely dry resin.
OPTIONAL EQUIPMENT:
  • Water chiller
  • Tensile Tester


CHILLER

Auto loader, hopper dryer

Tensile Tester Cy-6516

Micro-Computer Tensile Tester CY-6040AB
SPECIFICATIONS:
MODEL
JS-237AP
JS-2310AP2
Feature Material   PET (IV 0.8 and up) PET(IV 0.8 and up)
Quantity of line   1 2
Layflat width mm 9.5 / 13 / 16 / 19 9.5 / 13 / 16 / 19
Extruding output range kg/hr 40 - 100 80 - 220
Extruder Screw   75 100
Screw L/D   27 : 1 27 : 1
Driving motor HP AC 50 hp + Inverter AC 75 hp + Inverter
Heater capacity kw 67 101
Auto temperature controller sets 6 10
Quenching equipment Stainless steel quenching bath set 1 1
Water removal device Water removal air blower HP 2 HP x 1 set 2 HP x 2 set
Pre-heat unit Take up roller mm 213 x 1pc 213 x 3pc
Motor HP 1 HP (inverter) x 1 set  2 HP (inverter) x 1 set 
Roll dimension, stainless steel mm 510 x 4 pcs 510 x 4 pcs
Driving motor HP 3 HP (Inverter) x 1set 3 HP (Inverter) x 1set
Speed range M/mm 12 x 24 12 x 24
Temperature controller sets 4 4
Stretching unit No.1 Heating controller set 1 1
Temperature controller set 1 1
No. of roll pc 5 7
Driving motor HP 10 HP(Inverter) 20 HP (Inverter)
Speed range M/min 50-120 50-120
Disco set 1 (with cooling system) 1 (with cooling system)
Stretching unit No.2 Heating controller set 1 1
Temperature controller set 1 1
Roll dimensions (stainless steel) mm 213 213
No. of roll pc 5 7
Speed range M/min 50 -120 50 -120
Air compressor HP 1 HP x 1 set 1HP x 1 set
Embossing unit Embossing roller set 1 (Pneumatic type) 1 (Pneumatic type)
Motor hp DC torque 3 hp DC torque 3 hp x 2
Thermo setting unit Heating oven set 1 1
Temperature controller set 1 1
Stainless quenching batch set 1 1
Water removal air blower set 2 HP x 1 2 HP x 2
Take up unit Motor hp DC Torque 3 hp x 1 DC Torque 3 hp x 2
Roll dimension mm 213 x 1pc 213 x 2pc
Winding unit No. of spindle pc 2 4
Motor hp DC Torque 1 HP x 2 DC Torque 1HP x 4
Winding width range mm 152 , 200 152, 200
Core bobbin mm 200.400 200.400
Others Total electricity kw 165 250
Machine weight ton 14 20
Machine dimension m 28.8 (L) 35.16 (L)